Quick Start - Audiolab FORGE 15A Manual Del Usuario

5. QUICK START

One module
Make all initial connections with all the equip-
ments powered off, and ensure that all the
main volume controls are turned completely
down.
1. Connect one side of the signal cable at your
audio mixer into output left / right (with
Stereo-Jack or XLR) and the other side of the
cable into the line input Stereo-Jack) of your
active speaker cabinet.
2. Connect the power cord to mains.
Tripod
Mount
P. 6
AUDIOLAB FORGE 15A -
English version
Signal Cable
Left
Main Mix
Output
Mixer
3. Turn on your mixer first, then the active
speaker cabinets.
4. Turn up the volume control of the active
speaker cabinets.
5. Use PFL function to get the proper input
level for the mixer, and adjust the main mix
level control to manipulate the output level.
6. After using, turn off your active speaker cabi-
nets first, then the mixer.
Signal Cable
Right
Main Mix
Output
Tripod
Mount