How To Operate - Hamilton Beach 68050 Manual De Instrucciones

How to Operate

1. Make sure the unit is unplugged.
Place base on clean, dry surface.
2. Hook front housing onto base.
3. Place ice shaving chamber in front
4. Twist shaft in direction of arrow to
5. Place mixing paddle in bowl.
6. If mixing shaved ice with other
ingredients, place ingredients in
bowl.
NOTE: Use serving size markings on
bowl as a guide for appropriate ice
and liquid levels.
4
840154601 ENv01.indd 4 840154601 ENv01.indd 4
7. Slide bowl into place on base and
NOTE: The cup guide on base may
be used to shave ice into bowl or cup
other than bowl supplied.
housing and
8. Turn selector knob to desired
ensure it is
setting. Slushie setting produces
seated on the
finer ice. Snow Cone setting
shaft.
produces coarser ice.
9. Place ice in ice shaving chamber.
Do not fill above top rim of ice
shaving chamber.
10. Plug cord into outlet.
11. Place lid on front housing and turn
lock into
position.
necessary to open lid occasionally
to redistribute ice.
• Avoid contact with shaving blade.
• Do not use if shaving blade is loose,
cracked, bent or damaged.
12. Turn lid counterclockwise to stop.
DO NOT shave ice above top
ICE line.
13. To remove bowl, turn counter-
clockwise, slide out and serve
Icy Treat.
turn clockwise
until it stops
at post. This
will allow the
mixing paddle
to mix ice and
ingredients
once operation
begins.
clockwise to
lock interlock
switch
(Power Start/
Stop). The
unit will start
and begin
to shave
ice.NOTE:
It may be
WARNING
Cut Hazard
12/14/12 10:04 AM 12/14/12 10:04 AM