Sunex Tools SX505A-8 Instrucciones De Operación

Operating Instructions • Warning Information • Parts Break­down
some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
your risk from these exposures varies, depending on how often you do
this type of work. to reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out
microscopic particles.
SPECIFICATIONS
Free Speed . . . . . . . . . . . . . 4,000 RPM
Max . Torque . . . . . . . . . . .1,460 ft . lbs .
Torque Range . . . . . . 600-1,200 ft . lbs .
Weight . . . . . . . . . . . 30 .9 Lbs . (14 .0 kg)
Sound Level . . . . . . . . . . . . . . . 87 dBA
SX505A-8: Parts Breakdown & Operating Manual
Length . . . . . . . . . . . . . 21 .7" (550 mm)
Air Inlet Thread . . . . . . . . . . . .1/2" NPT
Avg . Air Consumption . . . . . . .13 .4 cfm
Rec . Air Pressure . . . . . . . . . . . . 90 psi
SX505A-8
1" Drive iMPACT
wrenCh wiTh 8"
exTenDeD Anvil

AlwAys reAd instructions
before using power tools
AlwAys weAr
sAfety goggles
weAr heAring
protection
Avoid prolonged
exposure to vibrAtion
rev. 02/2/07