Berker Komfort Instrucciones Para El Uso página 12

GB
Attention:
• Electrical equipment must be installed and fitted by qualified
electricians only and in strict observance of the relevant
accident prevention regulations.
• Failure to observe any of the installation instructions may
result in fire and other hazards.
• Risk of irreparable damage to the device!
U and GND must not be interconnected with the corres-
S
ponding terminals of another device.
Never connect the sensors at the inputs (E1...E4) of the
weather station to the supply terminals U
connected analog input module.
Safety instructions
and GND of a
S
Safety instructions
• The terminal block for the connection of the combination
sensor must be plugged on before the mains voltage is
switched on and during operation to prevent the digital input
from unintentional contact with live wires. This would
endanger the safety of the entire system.
As a result, the device and any sensors or analog input
module connected may be irreparably damaged.
GB