Setting Up Your Tv - Insignia NS-14FTV Guia Del Usuario

NS-14FTV/NS-20FTV Color TV

Setting up your TV

Connecting cable TV or a VHF/UHF external antenna
Caution
To connect cable TV or a VHF/UHF external antenna:
1 Connect a 75 Ohm cable to the antenna jack on the back of your
TV.
2 Connect the other end of the 75 Ohm cable to cable TV or an
external VHF/UHF TV antenna.
Note
Do not bind the antenna cable and the power cord together.
If you use a 300 flat feeder, you need to connect a 300/75 Ohm
converter to the 300 flat feeder, then connect the converter to your
TV antenna jack.
We recommend using a 75 Ohm cable to reduce interference
caused by radio waves.
www.insignia-products.com 11