Dictator DICTAMAT 50 KP Manual Tecnico página 16

Technical Manual
DICTAMAT 50 KP
2) Adjustment of the
Closing Speed
Ill. 11a
Damping Force
Page 02.057.06
D) Adjustment of the Closing Force and Speed (cont.)
In order to adjust the closing speed open the door completely.
Now adjust the closing speed during the closing of the door by turning
the adjustment screw of the radial damper (Allan key 5.5 mm or slotted
screw driver) (see ill. 7).
Turning clockwise:
Turning anticlockwise:
Now make sure that the spring closes the door from every position, also
the not completely opened door. If necessary increase the pretension
(see point 1. IMPORTANT: Pretension the spring only when the door
is completely opened!)
Adjustment screw for
the closing speed
Nm
2
1,5
1
0,5
0
0 50
© DICTATOR TECHNIK GMBH Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail info@dictator.de • 1043
reduces the closing speed
increases the closing speed
Maximum adjustment LD50
100 150 200 U/min
Ill. 7
Ill. 8
LD50
LD50-2
Minimum adjustment LD50-2