L Ens A Djustment - Grandstream Networks GXV 3662 Manual Del Usuario

I
nstaLLatIon
Step 1: Take out the 3 screws on
the housing. Use the tool comes
with the package.
Step2: Open the cover.
Cable
Step3: Attach the alighment sticker onto the surface.
Step4: Drill 3 holes at the place where the mounting holes
are ( ) and hammer the 3 plastic anchors into the holes.
Then, insert the screws. Feed the cables through the cable
hole.
Step5: Adjust the lens. (More detail on page 4)
Step6: Screw back to the housing.
Step7: Complete the installtion.
~
Cable Cable Cable
~
3
L a
ens djustment
2
1. Adjust the lens VERTICALLY:
- Loosen the screws on both sides of axle.
- Adjust the lens to desired position. Allowed adjustment
range is 0 ° ~160 °.
-Tighten the screws to finish adjustment.
2. Adjust the lens HORIZONTALLY:
- Turn the lens to desired position. Allowed adjustment
range is 0 ° ~ 356 °.
1
~ ~
4