Bimar AP02 Folleto De Instrucciones página 7

1. Device control.
2. Switch control, allows you to turn the device on
and off remotely
3. Timer, allows you to plan when the plug
switches on or off.
4. Countdown, allows you to turn the plug off
after a certain time interval.
5. Statistics, allows you to monitor the
consumption of the device connected to the
smart plug in real time, allowing you to view the
consumption history in a convenient diagram.
6. Scenario: this function allows you to create
scenarios to be implemented if conditions are
met.
7. Profile: allows you to manage your personal
data.
Use
Check the following conditions before each use
1. Check that the router is for home use (i.e. it has no access restrictions other
than the password), the WiFi network is 2.4 GHz, the WiFi signal is strong
and uniform in the environment where the smart plug is to be installed.
2. Make sure the smartphone is connected to the same WiFi network as the
smart plug.
First Instalation
- Installing the Application:
1. Install the "Smart Life or o Bimar AP2" application by searching it on Google
Play (android) or from the App Store (iOS), or scan the QR code here to
proceed with the installation. The free "Smart Life or o Bimar AP2" app is
compatible with devices that support iOS 8.0 or higher or Android 4.4 or
higher.
For Android
2. Register the plug by entering your phone number. You will receive a
confirmation code to complete the registration of your account.
- Connecting the smart plug with the application
Simple mode (recommended)
For iOS
7