Alesis PRESTIGE ARTIST Guia Del Usuario página 12

Settings
To change other settings of the digital piano:
1. Press and release the Settings button. The Display will show the Settings page.
2. Use the Value Encoder to select one of the following parameters and then push the value
encoder to select it for editing.
•
Transpose: Sets the transposition of the full keybed (-12 to +12).
•
Tune: Sets the tuning of the full keybed (-50 to +50).
•
Touch Sensitivity: Sets the touch sensitivity of the keybed:
Fixed: The volume level does not change at all regardless of how soft or hard you
o
play the 88 keys.
Soft: The volume level does not change much when press the 88 keys soft or hard.
o
Medium: This is the standard piano touch response, and the default setting.
o
Hard: The volume level changes a lot when press you the 88 keys soft or hard. You
o
have to hit the keys hard to produce a loud sound.
•
MIDI Channel: Selects the MIDI channel for which USB-MIDI messages are sent (Omni,
1-16).
•
Local MIDI: When local MIDI is on (default), sound will be generated and heard through
the speaker, and MIDI messages will be sent to the USB-MIDI output when keys are
played. When local MIDI is off, sound will not be generated, however MIDI messages will
still be sent to the USB-MIDI output when keys are played.
•
Eco Mode: When enabled, this turns the power off after 30 minutes option.
•
Factory Reset: Restores the keyboard to the factory default settings.
3. Once you're done editing a parameter, push the Value Encoder again to deselect the
parameter, and change the focus back to choosing another parameter. To exit the Settings
screen and return to the main screen, press the Settings button again.
12