Raise Or Lower The Workstation - StarTech.com ARMSTSLG Guia Del Usuario

Raise or lower the Workstation

Stored Energy Hazard! This product contains a spring mechanism which can cause
the assembly and/or mounted equipment to move forcibly, and quickly, when released
via the actuating lever or handle. Read and follow the operating instructions and
heed any precautions provided. Before operating the lever or handle, understand the
motion created by the spring mechanism and always exercise caution. Failure to do so
may result in property damage and/or serious personal injury.
Tipping Hazard! This product is freestanding and therefore prone to tipping if
mishandled or overloaded. Exercise caution when moving, loading, unloading and
adjusting the workstation. Failure to do so could result in equipment damage and/or
personal injury.
Pinch hazard! During the upward or downward movement of the workstation,
pinch points can be created by the sliding and rotating components. To avoid injury
or property damage, keep your hands, arms and property away from these moving
components and pinch points. Failure to follow this instruction may result in property
damage and/or serious injury.
Caution! Ensure all equipment cables are of adequate length for the highest
workstation position. Failure to do so may result in property damage and/or personal
injury.
Warning! When lowering or raising the workstation, ensure the mounted equipment
is properly secured or supported and the speed is slow enough to prevent any
equipment instability. Failure to do so may result in property damage and/or personal
injury.
figure 1
Paddle
Instruction manual
6