1. Cleaning the bottle
Unscrew the lid and remove the straw, clean all the components
except for the lter cartridge with a mild detergent by hand or
in the dishwasher (max 50℃).
2. Preparing and installing the lter
Take the lter out of the packaging and rinse it under tap water
for 10 seconds. Unscrew the lid and remove the straw. Insert the
lter cartridge into the straw, and reattach the straw back to the
lid and twist it tight.
3. Filling the bottle
Fill the bottle with tap water up to the max line (for Daily bottle
only). Screw the lid back on to the bottle. Now take a sip and
enjoy!
4. Changing the lter cartridge
One lter can lter up to 150 litres of tap water. To ensure optimal
ltration and hygiene, it is recommended to replace the lter
every 4 weeks. To do this, repeat step 2.
Get started
EN 10