Your Air Purifier; Product Overview (Fig.a); Controls Overview (Fig.b); Getting Started - Philips AC1214 Manual Del Usuario

2 Your air purifier

Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.

Product overview (Fig.a)

A
Control panel
B Air quality light
C Air outlet
D
Air quality sensor
NanoProtect filter Series 3
E
(FY1410)
NanoProtect filter Active Carbon
F
(FY1413)
G Pre-filter
H
Air inlet
I Front panel
Controls overview
(Fig.b)
J On/Off button
K Night sensing mode button
L
Display screen
M Wi-Fi indicator
N Fan speed button
O
Child lock button

3 Getting started

Installing the filters

Note
• Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
• Make sure the side of the filter with the
tag is pointing towards you.
1
Pull the bottom part of the front
panel and gently lift to remove it
from the air purifier (Fig.c).
2
Press the clip down (1) and pull the
pre-filter towards you (2) (Fig.d).
3
Remove all filters (Fig.e).
4
Remove all packaging materials
from the filters (Fig.f).
5
Place the thick filter (FY1410)
into the air purifier and then the
thin active carbon filter (FY1413)
(Fig.g). The model numbers are
shown on each filter.
6
Attach the pre-filter back into the
air purifier (Fig.h).
Note
• Make sure the side with the clip is
pointing towards you, and that all
hooks of the pre-filter are properly
attached to the purifier.
7
Reattach the front panel by pressing
the top part of the panel onto the
top of the air purifier (1). Then, gently
push the panel against the body of
the air purifier (2) (Fig.i).
8
Wash your hands thoroughly after
installing filters.
EN 5