Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
En
Installation instructions
allinone 2
- take control of your system
Stylish control panel, which locates in 5.5" PC bay provides more control
of the system and improves its multimedia functionality.
Warning
Never switch on the system until the fans and power for the allinone
panel are connected. Improper Installation will result in damage to
the computer.
Electrostatic discharge (ESD) can damage system components. Use an
ESD controlled workstation. If such a workstation is not available, wear an
antistatic wrist strap or touch an earthed surface before handling any PC
components.
Specification
Fan compatibility
V DC, 3-pin, 4-pin (PWM), max 0.5A (each)
RPM display
0000 ~ 9990 RPM
Manual RPM adjustment
Seven steps from 6V to V (by V)
Auto RPM adjustment
Three steps 7, 0 and V
Low RPM alarm settings
500 ~ 000 RPM ( step 00 RPM)
o
Temperature display
0 - 90.0
C (3 -94
o
High temp. alarm settings 40 - 80
C (04 -76
Preset alarm values
Low fan RPM: 800 / High probe temp. 50
Thermal probe temp
temp. range 0-54
for auto fan control
temp. range 55-64
temp. range 65-90
Input power
+5V / + V DC , USB bus power
I/O ports
USB .0 × 3 / 394 × / eSATA × / HD&AC' 97 Audio x
Supported memory cards
(CF) Compact Flash and (MD) Micro Drive
(MS) Memory Stick / Pro / Duo
(SD) Secure Digital / SDHC (high capacity) and MMC
(eX) Extreme Digital
(microSD) microSDHC, microSD
Interface of card reader
USB .0
OS compatibility
Windows 000 / XP / Vista
o
F)
o
o
o
F), step 5
C (9
F)
o
o
C (
F)
o
C = fan voltage 7V
o
C = fan voltage 0V
o
C = fan voltage V
Installation components
SATA data cable x1
Internal USB cable x1
Internal IEEE 1394 cable x1
Internal audio cable x1
Power cable x1
Fan cable x3
Screws and adhesive set x1
Temperature sensor x4
Publicidad
Tabla de contenido
