Teac CD-532EK Manual página 25

ON/BUSY indicator
The indicator lights in Seek, Play or Read operation.
Continuously lit
•
During seek
•
During data transfer
Flashing at intervals of 1.5sec
•
While audio is being played
•
During audio scan
Flashing at intervals of 0.8sec
•
From POR or tray loading to the end of TOC read (when the
disc is present)
•
From POR or tray loading to the end of detecting the disc
(when the disc is not present)
If an error occurs which is considered to arise from disc, flashing
continues until the disc is ejected. If an error occurs which seems
to rest with the drive's hardware, flashing continues until the
power is switched OFF.
Volume control
Adjusts headphone's volume.
Emergency hole
When the power is switched OFF and the eject button does NOT
function, insert a metal rod (diameter of 1.2mm or less) into this
hole at a right angle to the front panel, then push the rod to eject
the disc. Do this only when the ON/BUSY indicator is NOT lit.
Eject button
Press this button to open or close the disc tray.
2. Controls and Functions 25