Warranty; Technical Data - IKA MS 1 Indicaciones De Seguridad

Warranty

You have purchased an original IKA laboratory machine which
meets the highest engineering and quality standards.
In accordance with IKA warranty conditions, the warranty period is
24 months. For claims under the warranty please contact your
local dealer. You may also send the machine direct to our works,
enclosing the delivery invoice and giving reasons for the claim. You
will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to
faults resulting from improper use or insufficient care and
maintenance contrary to the instructions in this operating manual.
If you require servicing, return the appliance in its original packa-
ging. Storage packaging is not sufficient. Please also use suitable
transport packaging.
14

Technical data

Design voltage: VAC
oder VAC
Design frequency: Hz
Input power: W
Output power W
Shaking rate: rpm
Speed adjustment:
Power supply acc. to IEC 60320:
Fuses: mA
(in cold device plug)
Mains cable:
Shaking rate display:
Drive:
Protection at overloaded:
Agitation stroke: mm
Shaking motion:
Perm. duration of operation: %
Perm. ambient temperature: °C
Perm. relative humidity: %
Protection type acc. to DIN EN 60 529:
Protection class:
Overvoltage category:
Contamination level:
Operation at a terrestrial attitude: m
Max. supported load incl. attachment: kg
Dimernsions: (W x D x H) mm
Weight without supported load: kg
230±
10%
115±
10%
50/ 60
31
10
0 - 2500 (infinitely
adjustable from 200)
analog (infinitely)
cold device plug
with fuses
2 x 400T (230V)
Ident-Nr. L001060
2 x 630T (115V)
Ident-Nr. 2008600
with ground wire and in
compliance with country
spezification
Scale 0 - 2500
Speed controlled DC-
motor, with ball bearings
Temperature sensor in
motor winding
4.5
circular
100
+5 bis +40
80
IP 21
I
II
2
max. 2000
0,5
115 x 225 x 60
3.5
MS1/2 122004