Climadiff CLS31 Instrucciones De Uso página 39

Handle installation
To install the handle provided with your wine cellar, please follow the below instructions:
1) Pull away the door gasket in the area where the handle has to be installed; you can see two
designated holes for the handle installation. The gasket is easily displaced by hand, no tools are
necessary.
2) Install the handle tightly as shown above with two screws. Be caution; do not over tighten as it will
cause damage to the handle assembly or surface of glass door.
3) Replace the door gasket to its original position. Make sure it will be well positioned and maintains
perfect hermiticity.
5. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-
20°C. The ambient temperature affects the internal temperature and humidity of your cellar. For
optimum performance, your cellar settings are made for ambient temperatures of 23 ° C to 25 ° C.
Control panel single zone : (CLS31/CLS41/CLS63)
Screw
Gasket
Handle
Door frame
39