Operation; Battery Status - pico Technology TA325 Guía De Usuario

______________________________________________________________
Always use appropriate equipment for personal
protection.
to measure
protective clothing suitable for high-voltage work.
4.4

OPERATION

To activate the unit, move the rotary switch from the OFF
position to the required measuring range. If the value of the
current being measured is unknown, first select the highest
range and then reduce accordingly.
4.5

BATTERY STATUS

Battery status is indicated by an orange LED on the front of the
integrator module. This LED will flash once when the unit is
switched ON. The length of time the LED is lit will increase as
battery life decreases. If the LED is continuously lit, the
batteries are low and need to be replaced.
_______________________________________________________________
9
Do not use the flexible current probe
bare conductors unless wearing