Tools Required - Garden Wood Furniture SIENNA FINISH 969KFSIc Instrucciones Para Armar

969KFSIc Fan Back Rocker
ASSEMBLY INSTRUCTIONS
Aa
1) Loosely attach each Left and Right Leg (J & K) to the Seat Assembly (E) with 8x40mm Hex Bolts
(Aa). Screws will be inserted later into the other holes.
2) To attach the Left and Right Runners (F & G) to the chair, thread six 4x35mm Phillips Screws (B)
into the predrilled holes in each runner.
3) Attach the Left and Right Back Supports (H & I) to the Seat Assembly (E) by threading one
4x35mm Phillips Screw (B) through the lower hole of the pair near the bottom of each support.
The longer edges of the back supports must face towards the front of the chair.
TOOLS REQUIRED: Phillips Screwdriver
Aa
Aa
F
H
K
Aa
E
Aa
J
G
H
Aa
Aa
I
969KFSIc – Page 3 – 05/08
E