Winchester 2012 El Manual Del Propietario página 13

Removing the safe from the pallet 11
Attention!
The following is BEST performed with several individuals and is only
a suggested method. Winchester Safes will not be liable for any
accidents, damages or injuries that may occur.
Step 1 Step 2
Using a 17mm wrench, hold the bolt in Slightly push upward on
place on the bottom of the pallet. From the safe from the side
the inside of the safe, use a 16 mm while somebody else
socket to remove the nut from the bolt, removes the skid.
from one side of the skid only!