Important Safety Information; Summary Of Device Labels Containing Safety Information - 3M 33579 Manual Del Operador E Instrucciones De Seguridad

Please read, understand, and follow all safety information contained in these instructions prior to the use of this device . RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE .
Read the Safety Data Sheets (SDS)
before using any materials.
SDS
Contact the suppliers of the workpiece
materials and abrasive materials for
copies of the SDS if one is not
readily available.
HEALTH HAZARD BY DUST – CALIFORNIA PROPOSITION 65 STATEMENT
!
WARNING! Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals
known [to the State of California] to cause cancer, birth defects or other reproductive harm . Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber .
Your risk from exposure to these chemicals varies, depending on how often you do this type of work . To reduce your exposure to
these chemicals:
• Work in a well-ventilated area, and
• Work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles .
• Wash hands after handling
SUMMARY OF DEVICE LABELS CONTAINING SAFETY INFORMATION
Markings
20,000 RPM
90 PSIG / 6 .2 BAR MAX
IMPORTANT SAFETY INFORMATION
WARNING
Exposure to DUST generated from workpiece
and/or abrasive materials can result in lung
damage and/or other physical injury.
Use dust capture or local exhaust as stated in
the SDS. Wear government-approved
respiratory protection and eye and skin
protection.
Failure to follow this warning can result in
serious lung damage and/or physical injury.
!
WARNING: READ AND UNDERSTAND INSTRUCTION MANUAL BEFORE
OPERATING TOOL .
!
WARNING: ALWAYS WEAR APPROVED EYE PROTECTION .
!
WARNING: ALWAYS WEAR APPROVED HEARING PROTECTION
Direction of rotation
WARNING: HAND/WRIST/ARM INJURY CAN OCCUR WITH PROLONGED
EXPOSURE TO VIBRATION
Maximum rotational speed
Maximum air pressure
Translation of Original Instructions
Description
3