Cobra Electronics microTALK PR 240 Manual Del Propietário página 9

Using Your Radio
Operation
Display Illumination
Light/Max Range
To Illuminate Your Display:
1. Press and release the
to illuminate the display for ten (10) seconds.
Auto Squelch/Maximum Range
Your microTALK
Squelch, which automatically shuts Off weak
transmissions and unwanted noise due to
terrain, conditions, or if you've reached your
maximum range limit.
You can temporarily turn Off Auto Squelch or
turn On Maximum Range Extender, allowing all
signals to be received and extending the maximum
range of your radio.
To Temporarily Turn Off Auto Squelch:
Light/Max Range
1. Press the
than five (5) seconds.
If you hear two (2) beeps, you have turned the
Maximum Range Extender On (see below).
To turn Maximum Range Extender On:
1. Press and hold the
for at least five (5) seconds until you hear
two (2) beeps which indicates the Maximum
Range Extender is On.
To Turn Maximum Range Extender Off:
1. Press and release the
button or change channels.
14 English
Light/Max Range button
® radio is equipped with Auto
Light/Max Range button less
Light/Max Range button
Light/Max Range
Introduction
Lock Button
•
Lock Icon
•
Speaker/Microphone
Operation Customer Assistance
Lock Function
The Lock function locks the Channel,
Mode, and Power buttons to prevent
accidental operation.
To Turn the Lock On or Off:
1. Press and hold the Lock button for
two (2) seconds.
A double beep sound is used to confirm
your Lock On or Off request. When in
Lock Mode, the Lock icon will be displayed.
Speaker/Microphone Jack
Your microTALK ® radio can be fitted with
an external Speaker/Microphone, freeing
your hands for other tasks. Contact your
local Cobra ® dealer or Cobra ®
for optional accessories. Only Cobra
authorized accessories are recommended.
To Attach Your Speaker/Microphone:
1. Open the Speaker/Microphone
top of your microTALK ® radio.
2. Insert the plug into the Speaker/
Microphone jack.
Nothing comes close to a
Warranty
•
•
directly
®
tab on
Cobra ™ 15