Honeywell Home CT410A Manual Del Propieratio página 2

Hg
N O M E R C U RY
Installation
When Installing This Product
1. Read these instructions carefully. Failure to follow them could damage the
product or cause a hazardous condition.
2. Check the ratings given in these instructions to make sure the thermostat
is suitable for your application.
3. After installation is complete, check out operation as provided in these
instructions.
Preparation
Proper installation of your thermostat will occur if you follow these
•
instructions STEP-BY-STEP. It is recommended that as you read,
understand and complete each step, you check it off with pencil or pen.
Check thermostat suitability for your home's system by reviewing the
•
ratings above.
Make certain that your heating system is working, especially if it has been
•
inoperative for a length of time. If the system does not work, contact your
local electrician for assistance.
Carefully unpack your new thermostat. To avoid damage to the sensing
•
element, do NOT remove the thermostat cover until wiring has been
completed.
Save packages of screws, instructions, receipt and proof-of-purchase.
•
ATTENTION: MERCURY RECYCLING NOTICE
This product does not contain mercury.
However, this product may replace a product
that contains mercury. Mercury and products
containing mercury should not be discarded in
household trash.
For more information on how and where to
properly recycle a thermostat containing
mercury in the United States, please refer to the
Thermostat Recycling Corporation at
www.thermostat-recycle.org.
For mercury thermostat recycling in Canada,
please refer to Switch the Stat at
www.switchthestat.ca
2