Publicidad
Idiomas disponibles
Idiomas disponibles
- Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other li-
quid or place it under running water.
- If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
- Then dry all parts before its assembly and storage.
Anomalies and repair
En cas d'anomalie et avant de faire appel à un techni-
cien agréé ou à notre service après vente, vérifier les
points suivants :
Problem
No rotation power on
Apparent vibration
Mist function not working
Indicator light off once the
appliance on
Mist with odors
Choose the adequate sentence/s depending of after service kind:
- Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not
attempt to disassemble or repair the appliance yourself as this may be dangerous.
Cause
- Motor no working
- Too low voltage
- Motor shaft gets stuck
- Circuit board broken
- Rear guard loosens
- Blade broken or imbalance
- Water tank is empty
- Water tank is broken
- Appliance is off
- Odors will disappear after use for a
period of time
- The water tank interior part is dirty
Features:
Puissance : 90 W
Voltage : 220-240 V
Fréquence : 50 Hz
Brumisation : 280 ml/h
Capacité du réservoir d'eau : 3,1 l
Classe II
Solution
- Contact the after sales service
- Lock the protection guard
- Replace the blade
- Refill the water tank
- Replace the water tank
- switch on the appliance
- if still not working, contact the after sales service
- Open the water tank cap in a cool ventilated place
- Change the water in water tank
English
Publicidad
