Package Contents; Installing The Lamp; Speci Cations - TaoTronics TT-DL031 Guia Del Usuario

EN

Package Contents

• 1 x TaoTronics LED Desk Lamp (Model: TT-DL031)
• 1 x Power Adapter
• 1 x User Guide
• 1 x Screwdriver
• 1 x Hex Bolt

Installing the Lamp

1. Insert the lamp arm into the hole on the lamp base.
2. Fit the bolt into the hole from the bottom of the base.
3. Use the included screwdriver to tighten.

Speci cations

Model TT-DL031
Light Source LED
Operating Voltage
DC 12V / 2A
USB Output
DC 5V / 1A
Wireless Charger Output
DC 5V / 1A
Voltage
Wireless Charger
＞70%
Conversion Rate
Power for the Lamp (Not
Including the USB or
10W
Wireless Charger)
Color Temperature
2800 - 6500K
Lumens
350 lm
Operating Temperature
-20°C to 40°C / -4°F to 104°F
CRI > 80
Using the Lamp
Use the power adapter to connect to a power source. The indicator on the Power Button will
light up in blue.
Power On / Off
Tap the Power Button to turn on / off the lamp. The indicator turns off when the lamp is turned on.
Brightness Control
When the lamp is turned on, slide across the Brightness Slider to adjust the brightness. The
indicators on the slider light up accordingly.
Color Temperature Control
Tap the Mode Button to cycle through 5 color temperature settings.
Timer
Tap the Timer Button to set to 1 hour auto turn-off timer. Once the timer is activated, the
indicator on the button will turn red. Tapping the button again will turn the timer off.
Memory Function
The lamp will retain the color temperature and brightness setting of the time when it was last
turned off.
Note: Set the lamp to low brightness level when you turn it off to prevent glare.
01/02