Axis Q60-S Serie Guia De Instalacion página 30

AXIS Q60-S Series
Mounting example (wall bracket sold separately)
1
Safety wire
4. Remove the protection cap covering the multi-connector on the camera.
5. Connect the multi-connector cable to the connector on the camera. Use the alignment
indicators to find the correct position.
NO TICE TICE
NO NO TICE
Be careful not do damage the multi-connector cable when connecting it.
6. Align the guide hole in the camera with the guide pin in the flange and fasten the
network camera to the mounting bracket with the screws.
1
30