Descargar Imprimir esta página

BH HIPOWER SF2500TR Manual Del Usuario página 16

Unidad electrónica

Publicidad

Idiomas disponibles

Idiomas disponibles

HEART RATE CONTROL.-
It is advisable to do a brief warm-up session before using this program. This will prevent possible injuries.
This program allows you to select a heart rate (between 60% and 95% of the maximum heart rate) and the
machine will automatically adjust exertion levels to ensure that the user maintains the selected heart rate
value. Use of heart rate measurement using the hand-grip sensors or the telemetric chest band is necessary.
The maximum number of heartbeats that a person must never exceed is referred to as the maximum heart
rate and this value drops with age. A simple formula to calculate this value is to subtract your age, in years,
from 220. To ensure that you are exercising correctly try to keep between 65% and 85% of your maximum
heart rate value, it is not advisable to go above 85%.
The HRC is made up of 4 programs: three which have a preset percentage (65%, 75% and 85%) plus a
fourth (THR) which allows the user to choose the BPM they want within a range of between 60-95%.
From Screen 1, press the Heart Rate
Control button and you will then see
Screen 14. Fill in the required fields for
the test and choose the heart rate you
wish to target. After doing this, press
the Green Arrow key to begin the
workout.
When
the
underway you can vary the parameter
levels with the +/- keys. It is also necessary to keep your hands in the hand-grip to monitor heart rate or to
use an optional telemetric wireless chest strap.
Once the workout has been completed or the Stop key is pressed, you will
see Screen 15, which shows a summary of the workout.
Press the previous button or wait a 2 minutes to return to Screen 1.
PHYSICAL TEST.-
The Physical Test is a fitness test based upon VO2 MAX. VO2 Max, or maximal oxygen uptake, is one
factor that can determine an athlete's capability to perform an endurance based workout.
From Screen 1, press the PHYSICAL
TEST button and you will next see
screen 16. Set the parameters using
the numbers at the bottom of the
screen then click the  to confirm.
Once everything is set, press the
Green Arrow key to begin the
exercise. When the program is underway you can adjust the level of speed and incline with +/- keys.
sportkoncept
program
is
Screen 1
Screen 1
Screen 1
16
Screen 9
Screen 9
Screen 3
Screen 10

Publicidad

loading