Conceptronic CNB 120 Manual De Usuario página 7

4.1 Select your voltage range
Before you can use your notebook adapter, you need to select the correct voltage range with the voltage
selector [C] of the notebook adapter. Below you see a close-up of the voltage selector:
You can select the following voltage ranges:
15V – 17V Suitable for all notebooks with the following input voltages:
18V – 21V Suitable for all notebooks with the following input voltages:
Make sure you set the correct voltage range for your notebook!
If you select the wrong voltage range, you can damage your notebook!
Select the voltage range for your notebook:
 Pull the voltage selector.
 Rotate the voltage selector to the correct voltage range.
 Push the voltage selector back to the original position.
4.2 Select your notebook tip
After setting up the voltage range for your notebook, the following step is to select the correct notebook
tip for your notebook. There are 10 tips included with the notebook adapter.
Tip: The tip list can be found in Appendix B at the end of this manual, together with a notebook brand
list. A complete list of compatible notebook types can be found on the Conceptronic website.
 Select one of the 10 tips included with your notebook adapter.
 Connect the tip to the tip connector of the notebook adapter.
Note: The tip can only be connected in 1 way to the tip connector!
4.Using your notebook adapter
! WARNING !
ENGLISH
15V - 15.5V - 16V –
16.5V - 17V
18V - 18.5V - 19V –
19.5V - 20V - 20.5V - 21V
7