Environmental Protection; Description Of Symbols; Declaration Of Conformity; Specifications - GMC 1800W Manual De Instrucciones

Environmental Protection

Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice

Description of symbols

The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Read instruction Manual.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant legislation and safety
standards.

Declaration Of Conformity

The Undersigned: Mr Philip Ellis as authorized by: GMC
Declare that:
PRODUCT CODE: DB250SMS/DB305SMS
DESCRIPTION: Double Bevel Slide Compound Mitre Saw
Electric power: 230-240V~ 50Hz 1800W
CONFORMS TO THE FOLLOWING DIRECTIVES:
• Directive 2004/108/EC Electromagnetic Compatability
• Directive 2006/95/EC Low Voltage Directive
• Directive 98/37/EC Machinery Directive
• Directive 2002/95/EC RoHS
• EN 61029-1: 2000+A11+A12, EN 61029-2-9: 2002
• EN 60825-1: 1994+A1+A2, EN 55014-1: 2000+A1+A2
• EN 55014-2: 1997+A1, EN 61000-3-2: 2006, EN 61000-3-11:2000
THE TECHNICAL DOCUMENTATION IS KEPT BY GMC
Date: 01/11/10
Signed by:
Mr Philip Ellis, Managing Director

Specifications

DB250SMS
Input power: 1800W
No load speed: 5000min
Blade size: Ø250mm
x Ø30mm bore
Number of teeth: 24
Mitre table angles: 0° to 52°
left & right
Bevel cuts: 0° to 45°
left & right
Straight cut:
0° x 0°: 280mm x 80mm
Mitre cut:
45° (L&R) x 0°: 196mm x 80mm
52° (L&R) x 0°: 170mm x 80mm
Bevel cut:
0° x 45° (R): 280mm x 27mm
0° x 45° (L): 280mm x 52mm
Compound mitre cut:
45° (R) x 45° (R): 196mm x 27mm
52° (R) x 45° (R): 170mm x 27mm
45° (L) x 45° (L): 196mm x 52mm
52° (L) x 45° (L): 170mm x 52mm
Weight: 25.7 kg
Noise and Vibration Data:
A Weighted Sound Pressure: 98dB(A)
A Weighted Sound Power:
Uncertainty:
Typical Weighted Vibration: 7.14m/s
Uncertainty:
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary
3
DB305SMS
1800W
5000min
-1 -1
Ø305mm
x Ø30mm bore
30
0° to 52°
left & right
0° to 45°
left & right
305mm x 95mm
215mm x 95mm
186mm x 95mm
305mm x 42mm
305mm x 52mm
215mm x 42mm
186mm x 42mm
215mm x 52mm
186mm x 52mm
25.72kg
111dB(A)
3dB(A)
2
1.5m/s
2
GB