i'coo Targo Instrucciones Para El Uso página 44

Tabla de contenido

Publicidad

e
FoLdIng the PuShChaIr
Press the secondary lock on the right-hand side of the upper
handlebar. With the button held in, pull both handlebar locks upward.
now the frame lock is released and you can fold the pushchair down.
handLeBar
adjust the handlebar by pushing the buttons by pushing the
central button (4b) and rotate to the desired height.
WheeLS
Fit both rear wheels onto the rear axle until an audible click is
heard and the lock button engages in the groove on the axle
(5a). Check if both wheels are securely fit.
Fit both front wheels onto the front steer-housing until an
audible click is heard and the lock button engages in the
groove on the axle (5c). Check if both wheels are securely fit.
reMoVIng the rear WheeLS.
Pull unlock button up (5d). now remove the rear wheel by
pulling the wheel sideways.
reMoVIng the Front WheeLS
Pull unlock button to the front (5f). now remove the front
wheel by pulling the wheel sideways.
SteerIng
the country frame has front wheel steering. Simply push the
pushchair into the direction you want and the front wheels
will steer into the desired direction. the wheels will go back
to straight position automatically.
BraKeS
apply the footbrake by pressing down the brake pedal in
the centre of the rear axle (6). a red button will be visible
to indicate that the brake is activated. to release the brake,
push up the brake pedal with your foot. the brake will now
engage automatically. Warning Ð always apply the brake
when parking the pushchair.
adJuStIng the Seat heIght
to adjust the height of the seat or pram, unlock the lock handles on
both sides of the height-adjustment. Move the seat or pram to the
desired position until the locking mechanism on both sides audibly
and visibly clicks into place. Check that the seat or pram is securely fit
by lifting the seat or pram. Warning - do not try to adjust the height
when a child is in the seat or pram.
PoCCo
CanoPy
Place the canopy by sliding the connection parts on the rail
that is placed on the central connection part (7a).
the canopy has a built in sunshade that can be found inside
of the front of the canopy. this sunshade is easily activated
by pulling it out (7b).
FrontBar
Place the frontbar by sliding the connection parts on the rail
that is placed on the central connection part (8a).
adjustment of the frontbar. to adjust the frontbar push
the buttons on both sides simultaneously and rotate to the
desired angle (8b).
SeatFraMe
take the seatframe with your hands placed on the central plastic
connector and place the seat to the engaging pins on the frame until
the locking mechanism on both sides audibly and visibly click into
place (9a).
36

Publicidad

Tabla de contenido
loading

Tabla de contenido