Using The Alarms; Using The Radio - Kicker ZK150 Manual Del Propietário

USING YOUR ZUNE DEVICE WITH THE ZK150
• Insert your Zune device into the ZK150 dock before turning on the ZK150.
• Installing the included isolation bracket will provide a more secure fi t for your Zune device
and reduce vibration.
• Tap the SNOOZE button to mute/unmute.

USING THE ALARMS

• Tap the alarm1 or alarm2 button to turn each alarm on and off.
• Use the quickstart on page 5 for instructions on how to set an alarm.
• You can set the alarm source to DOCK, FM1, FM2, AM, or buzzer.
• When an alarm goes off, hit the SNOOZE button to silence the alarm for 9 minutes.
• Before setting the alarm, play music on your Zune device and press pause.
• Turn off your Zune device's wireless sync function if the alarm source is set to DOCK.

USING THE RADIO

To improve FM/AM radio reception, connect the included FM antenna to the coaxial jack on the rear of
the ZK150 and/or the included AM Loop antenna to the AM terminals on the rear of the ZK150. You may
need to experiment with antenna angle/position for optimal reception.
• Source to FM1, FM2, or AM (see page 5 for instructions).
• Tap the navigation knob to display radio station; rotate the knob to adjust radio frequency.
• Use the and
• Store the current station in memory by holding any of the m1–m4 buttons.
• Recall a stored station by tapping the m1–m4 memory button to which it is assigned.
• Tap the SNOOZE button to mute/unmute.
Setting the Radio Region
1. Press setup then source within one second.
2. Rotate the navigation knob to select between Region 1 and 2.
3. Press the navigation knob to save.
Region 1: All countries except North America and the Caribbean
Region 2: North America (USA & Canada) and the Caribbean
6
ZK150 DIGITAL STEREO SYSTEM with ALARM
All manuals and user guides at all-guides.com
buttons to seek to the next strongest station.