Installation And Lubrication - Ingersoll Rand 41-EU Serie Especificaciones Del Producto

Ocultar thumbs Ver también para 41-EU Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
EN
Model
41PP8TSQ4-EU
41PP10TSQ4
41PP10TSQ4-EU
41PP17TSQ4
41PP17TSQ4-EU
41PP25TSQ4
41PP25TSQ4-EU

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585754 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1.
Air filter
2.
Regulator
3.
Lubricator
4.
Emergency shut-off valve
5.
Hose diameter
Clutch Adjustment
External
1. Rotate Sleeve until opening in Housing is visible.
2. Depress bit to engage clutch, then rotate until notch in Adjustment Washer or is visible.
3. Insert No. 1 Phillips screwdriver in notch to turn gear teeth on Nut.
4. Turning clockwise will decrease torque.
5. Turning counterclockwise will increase torque.
Internal
1. Remove Clutch Housing, Bit Holder and Clutch Assembly from tool.
Clutch housing has left-hand threads.
2. With bit in Bit Holder, clamp bit in vise.
3. Place Clutch Assembly on Bit Holder.
4. Engage jaws, hold Clutch Assembly from turning. Then rotate Adjustment Nut with 7/8"
wrench.
EN-2
Style
Pistol Grip, Postive Jaw, Trigger Start
Pistol Grip, Postive Jaw, Trigger Start
Pistol Grip, Postive Jaw, Trigger Start
Pistol Grip, Postive Jaw, Trigger Start
Pistol Grip, Postive Jaw, Trigger Start
Pistol Grip, Postive Jaw, Trigger Start
Pistol Grip, Postive Jaw, Trigger Start
Sound Level dB (A)
Pressure
6.
Thread size
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Grease (Disassembly required, see
maintenance instructions)
NOTICE
Vibration
ANSI S5.1-1971
(ISO28927)
Power
(ISO 3744)
84.0
97.0
84.0
97.0
84.0
97.0
84.0
97.0
84.0
97.0
84.0
97.0
84.0
97.0
47135462_ed1
Level
m/s²
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido