Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Product Safety Information Manual Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com.
Power Management System
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specific power. The power
output can be further reduced in forward or reverse by using the variable throttle.
Product Specifications
Model
Style
259G
Pistol
Impacting Sound Level dB(A)
(ISO15744)
Model
† Pressure (L
259G
91.6
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling disconnects.
See drawing 16619702 and table on page 2. Maintenance frequency is shown in a circular arrow
and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
45664752_ed2
Drive
Impacts
per
Type
Size
min.
Square
3/4"
1000
Free Speed Sound Level dB(A)
)
‡ Power (L
)
p
w
102.6
WARNING
Recommended Torque Range
Forward
ft-lb (Nm)
200-800 [1050 Max.]
(272-1085 [1424 Max.])
(ISO15744)
† Pressure
‡ Power
96.5
107.5
6.
Thread size
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Grease
EN
Reverse
ft-lb (Nm)
200-800 [1050 Max.]
(272-1085 [1424 Max.])
Vibration (m/s²)
(ISO28927)
Level
*K
6.4
0.8
EN-1
Publicidad
Tabla de contenido
