Step 2 : Very Important ! 3 Needed Angles; Step 3 : Assembly - cahors MINISAT Manual Del Usuario

B ad quality signal reception

4 - 2 Step 2 : Very important ! 3 needed angles !

In order to set up correctly your antenna, you must find inclination angle , azimuth angle and
elevation angle using the chart at the end of this user's manual. If you do not find into the list your
exact location, thank you for choosing the nearer city from your location you will find in the table.
We shall give you an example to receive Astra 1 in Brest area in France. The given angles taken
from the table are:
- inclinaison ( SKEW)
- Elévation
- Azimut

4 - 3 Step 3 : assembly :

1) First, fix the inclination or Skew angle joining angle bracket B1 with antenna body
A1.
Screw with S1 bolts the antenna rear body with the angle bracket adjusting the inclination
value (including sign) found in the table at the end of the user's manual and corresponding
to your location.
A1
B1
Good quality signal reception
BAD!
: -19,7°,
: 30°
: 149,6°
S1
-19.7
Check
GOOD!
S1
B1
S1
A1
5