Installation And Operation - brennenstuhl SH 4000 E Instrucciones De Empleo

Solar power with external solar panel
5
4
3
Fig. 2: Product guide: housing opened up
No. Description
3
Battery:
Stores the energy supplied by the
solar cell
4
Mounting holes:
To secure the rear panel to the
house wall
5
Cable bush:
Lead-through for connecting lead
to external solar panel
6
Connecting lead with plug:
Connects solar cell to printed
circuit board/power supply
7
Rear panel:
For wall mounting purposes
8 Electronic control circuit incl.
battery holder and socket for
connecting lead, with plug
9
Cover:
Protects the electronics
10
LEDs:
Maintenance-free lights (not
shown)
Table 3: Product guide: housing opened up
User's Handbook SH 4000 E
6
7
Fig. 3: Solar panel
No.
11
8
12
9
13
Table 4: Product guide: solar panel
7
The basic functions of the house number
light are explained in this section. Read it
through carefully so that you will understand
and be able to make use of all the functions.
instructions, especially those relating to
safety, in order to prevent operating errors
and potential defects.
If you have any problems, refer to the List of
faults (Section 11) or contact our Service
Centre (for contact details, see Section 12).
16
11
Description
Solar panel:
The solar cell contained in the
solar panel converts sunlight into
electrical energy.
Mounting base
To secure the solar panel
Socket
For the connecting lead

Installation and operation

IMPORTANT: Observe the following
Stand: 06_2011 rev. 02
12
13