Manuale del d'uso ed installazione – TARV
1. INTRODUCTION
The machine described in this use-and-maintenance handbook is a rectangual suction table and steaming.
The machine has the following features:
- a total module than can be carried by wheels;
- an electric panel separated from the boiler room;
- the boiler complies with PED safety standards (see manual);
- a safety valve with mechanic exhaust for overpressures;
- a safety thermostat combined with a pressure switch;
- an electronic level of the water in the boiler;
- a motor pump for automatically filling water into the boiler;
- an external cock for periodical drainage and maintenance;
- one taps with relevant switches for connecting irons or accessories;
- solenoid valves that can be adjusted in order to dose the outgoing steam;
- a switch for inserting the resistance;
- a pressure gauge for reading pressure in the boiler;
Do not use the machine for aims other than those it has been manufactured for.
In case of demolition, comply with the standards in effect in the country where
this operation is carried out.
2. TECHNICAL FEATURES
DESCRIPTION
Feeding voltage
Feeding frequency
Motor pump power
Maximum current absorbed by motor pump
Number of revolutions of motor pump
Resistance assembly power
Steam pressure
Capacity at minimum level (NW)
Overall dimensions
Maximum weight
Tests have been carried out for noise level. The weighted equivalent continuous sound pressure level A is
lower than 70 dB(A), and the weighted equivalent continuous sound pressure level A does not exceed 85
dB(A).
Therefore, the noise value found is very limited. For this reason, no special devices are scheduled for the
operator (also in view of the automatic operating features of the installation).
del 15-10-2001 - C:\SETTORE STIRO\M860-1-M870-1-M880-1-M890-1\MANUALE ISTRUZIONI\TARV.doc
UNIT OF MEASURE
V
Hz
W
A
Rpm
KW
Bar
L
Cm
Kg.
TARV
230-400 (with boiler)
50
600
2,5
2900
12-15-18
5
9.5
90x180xH98
280-350 (with boiler)
Pag. 25 di 55