Foreseeable Faults; Psa 82 Battery Charging Status Display On The Psa 100 Monitor - Hilti PSA 80 Manual De Instrucciones Original

Ocultar thumbs Ver también para PSA 80:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Use the PUA 86 19V motor vehicle power adapter to charge the PSA 81 battery (05) and to charge the
PSA 83 battery in the PSA 200 tablet.

3.3 Foreseeable faults

Do not use the PUA 85 19V to charge the PSA 81 battery (01 and 02).
Do not use the battery as a power source for other unspecified appliances.
Do not use the device where there is a risk of fire or explosion.
3.4 Battery charge status indicator PSA 81
PSA 81
The PSA 81 battery is equipped with 5 LEDs that indicate the state of charge. To display the current state
of charge, press the button on the top of the battery. Up to 4 green LEDs then light for a few seconds; the
more LEDs that light, the better is the battery's state of charge.
Status
4 LEDs light green.
3 LEDs light green.
2 LEDs light green.
1 LED lights green.
1 LED lights red.
Note
The fault may be remedied by charging the battery. If charging does not remedy the fault, the battery
must be replaced.
The error message can have the following causes:
Voltage too high
Short circuit
Voltage too low
Temperature is outside the charging temperature range
Wrong charger is connected
Electronic fault
While charging, the LEDs show the following statuses:
Status
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
1 LED blinks.
Note
The PSA 81 (01 and 02) battery may be charged only with the PUA 81 AC adapter.
The PSA 81 (05) battery can be charged using the PUA 81 or PUA 85 19V AC adapter.

3.5 PSA 82 battery charging status display on the PSA 100 monitor

PSA 82
PUA 81
The charging LED can have the following statuses:
Status
1 LED lights green.
LED 1 blinks green
No LED lights while in operating mode
4
English
Printed: 29.09.2017 | Doc-Nr: PUB / 5070488 / 000 / 07
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
Charge status: < 25 %
Error
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
Charge status: < 25 %
Meaning
The battery is fully charged.
The battery is charging
The battery is discharging.

Publicidad

Tabla de contenido
loading

Tabla de contenido