Tabla De Contenido - MAC TOOLS MPH1911 Manual De Funcionamiento Y Mantenimiento

TABLE OF CONTENTS
Introduction
Safety Instructions
Maintenance
Chisel Assembly
Specifications
Tool Components
Contact Information
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Do not use damaged, frayed or
deteriorated air hoses and fittings.
Air powered tools can vibrate in
use. Vibration, repetitive motions or
uncomfortable positions may be harmful
to your hands and arms. Stop using any
tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do
not overreach when operating this tool.
Do not use tool under the influence of
drugs, alcohol, medication, or if you are
tired.
Always turn off the air supply and
disconnect the air supply hose before
installing, removing or adjusting
6.2 bars
(90 psig/
any accessory on this tool, or before
620 kPa)
performing any maintenance on this tool.
2
3
3 - 7
7
8
9
10 - 11
12
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE TOOL.
SAVE FOR FUTURE REFERENCE
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
620 kPa)
Use protective equipment such as
glasses, gloves, safety shoes, as well
as acoustic protection.
6.2 bars
(90 psig/
620 kPa)
Remain vigilant, use common sense
and pay attention when using the
tool.
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
Always wear ANSI Z87.1 CAN CSA
620 kPa)
Z94.3 eye protection or for Europe,
suitable CE marked eye protection
6.2 bars
(90 psig/
620 kPa)
when operating or performing
maintenance on this tool.
Always wear suitable respiratory
protection when operating this tool.
6.2 bars
(90 psig/
620 kPa)
Operate at 90 psig (6.2 bar / 620
kPa) Maximum air pressure.
6.2 bars
(90 psig/
620 kPa)
Do not over-oil and do not use
heavy grade oil as stalling and low
performance may result.
6.2 bars
(90 psig/
620 kPa)
MACTOOLS.COM