Drain Kit - GE RAB71B Instrucciones De Instalación

ELECTRICAL REQUIREMENTS (230V/208V)
Provisions should be made to have the proper
electrical outlet near the case. All wiring should be
made in accordance with local codes and regulations.
The line cord included with the chassis (if used) will
extend to a wall receptacle located within the area
shown in tabulation below.
"F"
Inside
Model
AZ Series 21" max.
Wall Receptacles
"tandem" type "perpendicular" type
All wiring should be made in accordance with local
electrical codes and regulations.
See the Owner's Manual for how to connect electrical
supply.
NOTE:
Aluminum wiring in structure may pose special
ELECTRICAL REQUIREMENTS (265V)
WARNING:
Connection of a 265V product to a branch
circuit MUST be done by direct connection to be in
compliance with the National Electric Code. Plugging
a 265V unit directly into a building-mounted exposed
receptacle is not permitted by code.
See the Owner's Manual for how to connect
the electrical supply.
"G"
"F" "G"
58" max.
large "tandem" type
Specifications subject to change without notice
A Quality Product of GE Appliances

DRAIN KIT

If it is necessary to install a drain kit on this wall case,
the following kit is available:
RAD10 Internal/External Drain
1. With an "Internal Drain," the condensate drain tube
must be connected to an internal drain system
in the building.
WALL CASE WITH RAD10 DRAIN UNIT
Note: Shaded parts
included with
RAD10 drain kit
S teel mounting plate
Type "A" s crews
S peed nuts
Type "A" s crews
2. With an "External Drain" (which may be connected
to a field-supplied drain line), condensate water
can be drained away from the unit and building.
WALL CASE WITH RAD10 DRAIN UNIT
Note: Shaded parts
included with
RAD10 drain kit
S teel mounting plate
Type "A" s crews
NOTE:
It may be desirable or necessary to install the drain kit
on the case prior to installing the case into
the wall.
4
INTERNAL DRAIN
S ee detail
below
Overflow relief drain
S quare drain holes
Neoprene s ponge gas ket
Gas ket
Cabinet bottom
Tube
1/2" O.D.
Cover plate
EXTERNAL DRAIN
Overflow relief drains
S quare drain holes
Neoprene s ponge gas ket
1/2" O.D. drain tube
SCREW
Type "A"
METAL