Flamelux ALPS Manual Del Propieratio página 5

Hardware
Ax1
Step 1
139mm
Bx1
139mm
IMPORTANT INSTRUCTIONS
Cx4
Fix wall plugs (C) into wall.
1. Drill 4 holes (8mm diameter, 40mm deep) into wall.
2. Insert wall plugs (C) into the drilled holes.
3. Please refer to the diagram for hole locations.
4. The distance of the three top holes should be at least
600mm away from the ceiling.
Note: Before drilling into walls, always check that there are
no hidden wires, pipes, etc. Make sure that screws and wall
plugs supplied are suitable for supporting the unit in your
surface. Consult a qualified person if you are
E-4
ASSEMBLY INSTRUCTIONS
Dx4 Ex4
not sure.