Connecting The Unit To The Power Outlet; Connecting The Unit To Your Computer - Sony GIGAVAULT RHCIL Guía De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting the Unit to the Power Outlet

Connect the power cord to the AC adaptor. Next, connect the DC cable of the AC adaptor
to the DC connector of the unit. Finally, connect the power cord to the power outlet.
Make sure that the power outlet is close to the unit and readily accessible.
To AC outlet
Notes
• The shape of the power cord varies depending on the country or region of purchase.
• When using the drive with the 6-pin to 4-pin IEEE 1394 cable, you must connect the AC adaptor and
power cord to the unit. This is not necessary when using a 6-pin to 6-pin IEEE 1394 cable.

Connecting the Unit to your Computer

Connect the IEEE 1394 cable to the unit. Then, connect the cable to a IEEE 1394 port of
your computer.
Note
A default device driver is installed the first time you use the unit.
To your
computer
AC adaptor
IEEE 1394 port
IEEE 1394 cable
DC connector
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gigavault rhk80il

Tabla de contenido