Frequency Response - Peavey PV 23XO Manual Del Usuario

CONTROLS AND SWITCHES
Channel Gain Control:
Low Frequency Level Control:
High Frequency Level Control:
Low Frequency to High Frequency crossover: 100 Hz to 1 Khz x10 range: Changes Low Frequency

FREQUENCY RESPONSE

Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their
relative passbands.
Distortion:
Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise:
Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @
0dB(ref +4dBu) - 90dB
Low Frequency Output:
High Frequency Output:
Maximum Input Level:
Maximum Output Level:
Input Impedance:
10 k ohms unbalanced
CONNECTORS
Inputs:
XLR Balanced
Outputs:
XLR Balanced
Power Requirements:
PV
2-Way Stereo/3-Way Mono
SPECIFICATIONS
0 to +12 dB
-∞ to +6 dB
-∞ to +6 dB
-86 dBu below 80 dB
-84 dBu below -78 dB
+14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
+22 dBu, unbalanced +28 dBu, balanced
120V AC, 50/60 Hz, 20 watts (domestic model)
23XO
®
to Mid Frequency from (100 Hz to 1 kHz) to
(1kHz to 10 kHz)
2-way stereo/3-way mono changes the unit from
2-way stereo or 3-way mono
14 14