Kruger DT 154 Manual De Uso página 19

BUILT-IN MODELS
In-depth research has proved that our health is
directly related to the quality of the air which we
breathe. The electrostatic air cleaner has been
designed to filter and ionize the air, to make any
living environment healthier and more comforta-
ble. This appliance can be used in any environ-
ment where smoke, pollen or unpleasant odours
are a problem.
The DTI air cleaner consists of a unit that has to
be installed inside a false ceiling by means of
threaded bars to be fixed inside the casing.
Thanks to its hidden installation, it can be inser-
ted in any type of room. The practical air outlet
openings that can be oriented, allow to get the
most of the efficacious air cleaning action and dif-
fuse cleaned air and wellbeing in any part of the
environment.
TECHNICAL SPECIFICATIONS
Models
Cleaned air
Filtering surface
Absorbed power
Noise level
Tension - Frequency
Number of phases
Unit length (grille)
Unit height (grille)
Unit depth (grille)
Weight
Colour – Finishing
Activated carbon filter
Series remote control
Air change
Change absorbed power
USE LIMITS OF THE AIR CLEANER
Minimum temperature: +5 °C Maximal temperature: +35 °C Maximal relative humidity: 80%
20
DTI 200 - 300
air cleaner
REMOTE CONTROL
DTI 200
m3 / h 400-1500
cm2 38.000
W 300
dBA 35-50
V - Hz 230 - 50
Ph 1
mm 575 (720)
mm 310 (80)
mm 575 (720)
kg 30
Grey
(Optional)
m3 / h 500
W 50
®
Air outlet
Air intake grille
DTI 300
600-2400
100.000
170
37-52
230 - 50
1
885 (950)
255 (80)
885 (950)
39
White
(Optional)
1) These specifications may vary for technical reasons: for
more precise information refer to the plate situated on the
back of the appliance.
500
2) The noise levels are measured at a distance of 1 metre.
50
Air outlet
ENGLISH