Set Up/Assembly; Tool Set Up; Connecting To Air Supply - Smarter tools 71PC Air Tool Kit Manual De Instrucciones

2.2 Set Up/Assembly

When unpacking, make sure that all items are intact and undamaged. DO NOT
ATTEMPT TO OPERATE THIS TOOL WITH DAMAGED COMPONENTS.

2.3 Tool Set Up

1. Select the appropriate tool for the job. Do not force the tool. Use the
correct tool for your application. The correct tool will do the job better
and safer at the rate for which it is designed.
2. Attach all needed accessories before connecting the tool to the air
supply. Always disconnect the tool from the air supply when changing
accessories or making adjustments.

2.4 Connecting to Air Supply

CAUTION:
READ THE ENTIRE IMPORTANT SAFETY INFORMATION
SECTION AT THE BEGINNING OF THIS MANUAL
INCLUDING ALL TEXT UNDER SUBHEADINGS THEREIN
BEFORE SET UP/ASSEMBLY OR USE OF THIS PRODUCT.
Note:
For additional information regarding the location of parts listed
in the following pages, refer to the Assembly Diagram near
the end of this manual.
Note:
This air tool ships with a protective plug covering the air inlet.
This plug MUST be removed to operate. DO NOT attempt
assembly without removing the protective plug first.
WARNING!
TO PREVENT EXPLOSION: USE ONLY CLEAN, DRY,
REGULATED, COMPRESSED AIR TO POWER THIS TOOL.
DO NOT USE OXYGEN, CARBON, DIOXIDE,
COMBUSTIBLE GASES, OR ANY OTHER BOTTLED GAS
AS A POWER SOURCE FOR THIS TOOL.
2-2