iHealth BG1 Guia De Inicio Rapido página 3

Step 5: Obtain a blood sample
Press the lancing device against the site to be lanced and then press the release button to
puncture the site. Gently squeeze the site until a drop of blood forms.
Step 6: Apply the blood sample to the test strip
Quickly apply the blood sample to the absorbent hole on the tip of the test strip. Make sure
the confirmation window of the test strip is completely filled with the blood sample, and
remove your finger.
Step 7: Read the test results
After approximately 5 seconds, your blood glucose result will appear on your mobile device
screen. The meter needs to remain connected to your mobile device during testing and
syncing.
Step 8: Discard the used test strip and lancet
Remove the used test strip from the meter using a tissue.