Power Supply - FAR CLIM2011 CI Manual De Instrucciones

Note:
• Place the machine on flat ground, and keep it far from around things
at least 50cm.
• Make sure the socket can be reached from machine location.
• Keep the machine stand upright so that compressor can work well.
• Don't run the machine near to gasoline or any other flammable
liquids.
• Make sure free access of air-inlet and air-outlet.
• Don't use spraying agent (such as pesticides, paint) or other
flammable materials, otherwise plastic deformation, or even
electric damage of the machine may be caused.

Power supply

• Make sure no damage in plug.
• Don't use connector instead of plug.
• Insert pug into socket first, then turn on socket switch, press
key "POWER" to run machine.
• Make sure CLIM2011 CI will be connected to supply with system
impedance no more than 0.183 ohm. In case necessary, please
consult with your supply authority for system impedance
information.
Please safekeep this user's manual.
GB-5