Playing a Record
Important:
To avoid stylus damage, make sure the included stylus
guard is in place whenever the turntable is being installed, moved
and cleaned.
speed: 33 1/3, 45, 78 RPM according to the vinyl being played. When
playing a 45 RPM record, use the included 45 adaptor.
you are playing a 33 RPM record and you want the turntable to stop
turning when the record is finished. If the switch is set to OFF, the
turntable will continue turning.
Tone Arm to the desired position over the record. The platter will begin
on the record. The record will begin playing.
automatically. If it is set to OFF, the record will not stop automatically.
Tone Arm and gently move it back to its rest position.
protect it from accidental movement. Turn the Power knob to switch the
unit OFF. Unplug it from the power supply if it is not going to
be used for a while.
NOTE:
Should your record stop before the last track finishes,
Playing a Cassette
side to the right. By pushing slightly, the tape will slide into
place and begin playing automatically.
NOTE
: One end of the tape will remain visible.
halfway down while the cassette is playing.