Xqisit xqPRO 3.0 Manual Del Usuario página 10

9) Compatibility (Bluetooth device)
BT 2.1 or above device with A2DP / AVRCP / HFP/ HSP
10) Trouble shooting
Sound not clear or no sound
→ Please check xqPRO 3.0 or BT device volume level
Music playback is not transfered from BT device to xqPRO 3.0
→ Make sure your BT device has A2DP
→ Check if both devices are connected
→ Restart xqPRO 3.0 for auto connection with your BT device
LED remains off
→ Make sure xqPRO 3.0 is fully charged.
Sound is too low / too much distortion
→ Adjust the volume level of xqPRO 3.0 or BT device
Phone call is not answered by xqPRO 3.0
→ Make sure your mobile has HSP / HFP
→ Check if both devices are connected
→ Restart xqPRO 3.0 for auto connection with your BT device
Music playback is not resumed after hanging up a call
→ Press play to resume music
No music control by xqPRO 3.0 possible
→ Make sure your BT device has AVRCP
→ Connect via BT instead of 3.5 mm jack cable
10