18. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are
tight and there are no gaps between the parts. This will help keep the unit square.
19. Turn the previous assembly at its front edges.
20. With the pilot holes as a guide, fasten the Middle Stile (I) to the Side Stiles (H) by attaching two Metal
Brackets (9) at the joints, using two 12 mm Screws (5) per Bracket.
Fireplace Assembling
H
M3.5 x 12 mm Screw
(4 used in this step)
⑤
H
I
Straight Metal Bracket
(2 used in this step)
14
5
9
⑨