Publicidad
Idiomas disponibles
Idiomas disponibles
Volume
mfx protocol: The total volume for the sound functions
can be changed easily with the 60213/60214/60215 Central
Station in the CV menu "Sound". The function mapping
(assigning the function buttons) and the individual volume
settings are done with the function buttons. The sound
number is required for the function mapping.
fx protocol: In the fx protocol only the total volume can
be changed with CV 63. It is not possible to change the
individual volumes. However, settings done under mfx are
preserved.
DCC protocol: The volume can be changed by using the
CVs below. The sound number is required for the function
mapping and for the assignment of the CVs to the sound.
As delivered from the factory, this decoder does not have
operating sounds specific to a locomotive. If this is desired,
you can find them on our website at:
http://www.maerklin.de/de/produkte/tools_downloads/
decoder-updates.html
Operating sounds can be downloaded and copied onto the
decoder. To do this, you need to have the 60213/60214/60215
Central Station with Software Version 2.0 or greater.
28
Sound functions
Total volume
Sound effect: Function f2
Sound effect: Function f3
Sound effect: Function f5
Logic Functions f6
Sound effect: Function f7
Sound effect: Functions f8
Sound effect: Function f9
Sound effect: Function f10
Sound effect: Function f11
Sound effect: Function f12
Sound effect: Function f13
Sound effect: Function f14
Sound effect: Function f15
Sound-Nr.
Default Values
CV
60940
63
alle
255
0 - 255
143
4
180
0 - 255
140
1
180
0 - 255
144
5
180
0 - 255
—
—
—
146
7
180
0 - 255
147
8
180
0 - 255
148
9
180
0 - 255
145
6
180
0 - 255
150
11
180
0 - 255
155
16
180
0 - 255
152
13
180
0 - 255
153
14
180
0 - 255
154
15
180
0 - 255
—
Publicidad
Capítulos
