Wurth Master BS 96-A solid Instrucciones Para El Manejo página 9

BS 96A_solid.book Seite 9 Montag, 11. Dezember 2006 1:21 13
Product Specifications
Battery-operated
Screw driving drill
Part number
Rated power
No-load speed
Speed I
Speed II
max. torque
Drill dia. Steel
Drill dia. Aluminium
Drill dia. Wood
Screw dia.
Thread of work spindle
Weight approx. (without Battery)
Battery (SD)
Part number
Intended Use
The cordless drill/screwdriver can be used for drilling
wood, metal and plastics and also as a screw driver.
For damage caused by usage other then intended, the
user is responsible.
Battery Charging
The battery is equipped with an NTC temperature con-
trol which allows charging only within a temperature
range of between 0 °C and +50 °C. A long battery
service life is achieved in this manner.
Maintenance and Care
Always remove battery before working on machine.
Always keep the machine and the ventilation slots
clean.
If the machine should fail despite the care taken in man-
ufacturing and testing, repair should be carried out by
a Würth Master-Service agent.
For all correspondence and spare parts orders, always
include the article number on the type plate of the ma-
chine.
For the current spare parts list of this machine, log into
the Internet under "http://www.wuerth.com/partsman-
ager" or ask for a copy at your nearest Würth branch
office.
BS 96-A solid
0700 182 X
300 W
Power tools, accessories and packaging should be sort-
0–300 rpm
ed for environmental-friendly recycling.
0–1000 rpm
27 Nm
10 mm
10 mm
20 mm
6 mm
corporation into national law, power tools that are no
3/8" - 24 UNF
longer suitable for use must be separately collected and
1.24 kg
sent for recovery in an environmental-friendly manner.
Defective or worn out batteries must be recycled ac-
cording to the guidelines 91/157/EEC.
0700 980 3..
For this Würth machine, we provide a warranty in ac-
cordance with statutory/country-specific regulations
from the date of purchase (proof of purchase by invoice
or delivery note). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or im-
proper handling is excluded from the warranty.
Claims can be accepted only when the machine is pre-
sented undisassembled to a Würth branch office or a
Würth field service employee.
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN 60 745, EN 55 014,
EN 61 000, EN 50 366 according to the provisions of
the
98/37/EC.
06
Adolf Würth GmbH & Co. KG
P. Zürn
Subject to change without notice
Disposal
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its in-
Warranty
Declaration of Conformity
regulations 73/23/EEC,
R. Bauer
89/336/EEC,
9